Awesome Privacy

Recent Commits

• Rafał Miłecki (28 Mar 24)

  bcm4908: refresh kernel 6.6 config Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (28 Mar 24)

  bcm4008: prepare to work on kernel 6.6 Don't add KERNEL_TESTING_PATCHVER yet as there are some issues with it. On TP-Link Archer C2300 serial console seems to stop working after preinit: > Press the [f] key and hit [enter] to enter failsafe mode > Press the [1], [2], [3] or [4] key and hit [enter] to select the de� On Netgear R8000P XHCI causes external abort: [ 2.139586] Internal error: synchronous external abort: 0000000096000210 [#1] SMP [ 2.147212] Modules linked in: xhci_plat_hcd(+) xhci_hcd ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug(O) usbcore nls_base usb_common crc32c_generic [ 2.164774] CPU: 0 PID: 358 Comm: kmodloader Tainted: G O 6.6.22 #0 [ 2.172658] Hardware name: Netgear R8000P (DT) [ 2.177229] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.184395] pc : xhci_gen_setup+0x80/0x34c [xhci_hcd] [ 2.189591] lr : xhci_gen_setup+0x74/0x34c [xhci_hcd] [ 2.194788] sp : ffffffc0815d37b0 [ 2.198194] x29: ffffffc0815d37b0 x28: ffffff8002000000 x27: ffffff8001172d88 [ 2.205540] x26: ffffff8002000000 x25: 0000000000000000 x24: ffffffc078b603c0 [ 2.212888] x23: ffffffc078b2a008 x22: ffffff8001172c10 x21: ffffff8002000000 [ 2.220235] x20: ffffff8002000000 x19: ffffff8002000250 x18: 0000000000000000 [ 2.227582] x17: 626d756e20737562 x16: 2064656e67697373 x15: ffffffffffffffff [ 2.234929] x14: ffffff80019e9915 x13: ffffff80019e9913 x12: 00000000ffffffea [ 2.242276] x11: 00000000ffffefff x10: 0000000000000062 x9 : 00000000ffffffd0 [ 2.246760] bcm63138_nand ff801800.nand-controller: timeout waiting for command 0x4 [ 2.249623] x8 : 0000000000000073 x7 : ffffffc0815d37c0 x6 : 0000000000000075 [ 2.257513] bcm63138_nand ff801800.nand-controller: intfc status c00000e0 [ 2.264855] x5 : 0000000000000081 x4 : 0000000000000000 x3 : ffffff8001b61800 [ 2.279193] x2 : ffffffc080b5d000 x1 : ffffff80020003a8 x0 : ffffff8002000398 [ 2.286540] Call trace: [ 2.289048] xhci_gen_setup+0x80/0x34c [xhci_hcd] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (28 Mar 24)

  bcm4908: switch to the kernel 6.1 Tested on Netgear R8000P and TP-Link Archer C2300. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (28 Mar 24)

  bcm4908: use DT to mark NAND controller WP pin as not connected Use cleaner and more upstream-fit solution. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Robert Marko (26 Mar 24)

  airoha: remove 5.15 support Now that 6.1 is default, remove 5.15 support. Signed-off-by: Robert Marko <robimarko@gmail.com>

• Robert Marko (26 Mar 24)

  airoha: default to kernel 6.1 6.1 has been present as testing for a while now, so default to it. Signed-off-by: Robert Marko <robimarko@gmail.com>

• Rafał Miłecki (28 Mar 24)

  kernel: backport brcmnand support for "brcm,wp-not-connected" It's required to support NAND controllers with WP pin on boards that don't have it connected to NAND chip. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (27 Mar 24)

  bcm53xx: refresh kernel 6.6 config Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (27 Mar 24)

  bcm53xx: add testing support for kernel 6.6 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (27 Mar 24)

  bcm53xx: switch to the kernel 6.1 Successfully verified on Luxul XWR-3150 (BCM47094). Tested LAN, WAN, Wi-Fi, USB, sysupgrade. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (27 Mar 24)

  bcm53xx: refresh kernel 6.1 config Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Rafał Miłecki (27 Mar 24)

  kernel: fix NVMEM looking for OTP NVMEM cells in wrong DT node It was breaking NAND controllers drivers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

• Chukun Pan (09 Mar 24)

  sunxi: backport h616 thermal sensor support Backport H616 thermal sensor support from linux-next. Tested on the Orange Pi Zero 3 (H618 SoC). Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

• Chukun Pan (18 Nov 23)

  sunxi: add support for Orange Pi Zero 3 Key features: Allwinner H618 SoC (Quad core Cortex-A53) 1/1.5/2/4 GiB LPDDR4 DRAM 1 USB 2.0 type C port (Power + OTG) 1 USB 2.0 host port 1Gbps Ethernet port Micro-HDMI port MicroSD slot Installation: Write the image to SD Card with dd. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

• Chukun Pan (08 Dec 23)

  generic: 6.1: backport AXP PMIC support Backport AXP15060, AXP313a and AXP192 support. The AXP15060 PMIC is used for starfive boards, and the AXP313a PMIC is used for sunxi boards. Remove conflicting patches from starfive target. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

• Chukun Pan (05 Jan 24)

  uboot-sunxi: bump to 2024.01 This version supports LPDDR4 DRAM of H618 SoC. Runtime-tested: Olimex Olinuxino Micro (A20) Orange Pi Zero 3 (H618) Pine64 SoPine (A64) Tested-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

• Robert Marko (26 Mar 24)

  kernel: qca-ssdk: fix C45 MDIO support on kernel 6.6 Kernel 6.3 has introduced separate C45 read/write operations, and thus split them out of the C22 operations completely so the old way of marking C45 reads and writes via the register value does not work anymore. This is causing SSDK to fail and find C45 only PHY-s such as Aquantia ones: [ 22.187877] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 8, phy_id = 0x0 phytype doesn't match [ 22.209924] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0x0 phytype doesn't match This in turn causes USXGMII MAC autoneg bit to not get set and then UNIPHY autoneg will time out, causing the 10G ports not to work: [ 37.292784] uniphy autoneg time out! So, lets detect C45 reads and writes by the magic BIT(30) in the register argument and if so call separate C45 mdiobus read/write functions. Signed-off-by: Robert Marko <robimarko@gmail.com>

• Josef Schlehofer (26 Mar 24)

  tools/expat: update to version 2.6.2 Release notes: https://github.com/libexpat/libexpat/blob/R_2_6_2/expat/Changes Fixes: CVE-2024-28757 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

• Daniel Golle (25 Mar 24)

  generic: phy-mediatek-xfi-tphy: fix SGMII issue Fix issue of transmitting abnormal data which leads to link problems in 1G and 2.5G SerDes modes (SGMII, 1000Base-X, 2500Base-X) on the MediaTek MT7988 SoC. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b Signed-off-by: Daniel Golle <daniel@makrotopia.org>

• Goetz Goerisch (24 Mar 24)

  realtek: add Zyxel GS1900-8 v2 The Zyxel GS1900-8 v2 or Rev.B1 is a newer variant of the GS1900-8, but otherwise similar to the other GS1900 switches. Differences ------------ * Front Button labeled RESTORE * NO Power Switch on rear * Serial Header next to the barrel power connector * Part Number ends 0102F Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>

• Allen Zhao (09 Mar 24)

  mediatek: filogic: add Unielec U7981-01 support Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 8GB eMMC or 128 MB SPI-NAND RAM: 256MB Ethernet: 5x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset USB: M.2(B-key) for 4G/5G Module Power: DC 12V 1A UART: 3.3v, 115200n8 -------------------------- | Layout | | ----------------- | | 4 | VCC RX TX GND | <= | | ----------------- | -------------------------- The U-boot menu will automatically appear at startup, and then select the required options through UP/DOWN Key. NAND Flash and eMMC Flash instructions: 1. Set your computers IP adress to 192.168.1.2. 2. Run a TFTP server providing the sysupgrade.bin image. 3. Power on the router, into the U-Boot menu. 4. Select "2. Upgrade firmware" 5. Update sysupgrade.bin file name, input server IP and input device IP (if they deviate from the defaults) 6. Wait for automatic startup after burning Signed-off-by: Allen Zhao <allenzhao@unielecinc.com>

• Robert Marko (25 Mar 24)

  procd: update to Git HEAD (2024-03-25) 79f8cfa58ee7 ci: add github test workflow 428f40e7984f test commit fixing warnings 63058d1f81a5 ci: enable ujail builds 49ea930a862c utils: add key-value offset support to get_cmdline_val() ca8c30208d5e inittab: fallback when multiple "console=" is detected Required for the recent Elecom multiple console commits. Signed-off-by: Robert Marko <robimarko@gmail.com>

• Robert Marko (24 Mar 24)

  hostapd: fix Argument list too long build error Currently, both CI and local builds of wpa-supplicant will fail with: /bin/sh: Argument list too long Its happening as the argument list for mkdir in build.rules is too large and over the MAX_ARG_STRLEN limit. It seems that recent introduction of APK compatible version schema has increased the argument size and thus pushed it over the limit uncovering the issue. Fixes: e8725a932e16 ("treewide: use APK compatible version schema") Signed-off-by: Robert Marko <robimarko@gmail.com>

• Paul Spooren (23 Mar 24)

  treewide: update PKG_MIRROR_HASH after APK version schema With the change in version schema the downloaded files changed, too, mostly the hash is now prefixed with a tilde `~` instead of a dash `-`. Since each downloaded archive contains folder with the same name as the archive, the checksum changed. Signed-off-by: Paul Spooren <mail@aparcar.org>

• Pawel Dembicki (13 Mar 24)

  mpc85xx: add 6.6 testing kernel This commit adds 6.6 kernel as testing verion. Run tested: p2020/p2020-rdb p1010/TL-WDR4900-V1 p1010/BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

• Pawel Dembicki (13 Mar 24)

  mpc85xx: kernel: 6.6: refresh config config-6.6 refreshed by 'make kernel_oldconfig' p2020 config-default refreshed manually Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

• Pawel Dembicki (13 Mar 24)

  mpc85xx: kernel: 6.6: refresh patches Manualy refreshed: 101-powerpc-85xx-hiveap-330-support.patch 105-powerpc-85xx-panda-support.patch Rest done by 'make target/linux/refresh' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

• Pawel Dembicki (13 Mar 24)

  kernel/mpc85xx: Restore kernel files for v6.1 This is an automatically generated commit which aids following Kernel patch history, as git will see the move and copy as a rename thus defeating the purpose. See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html for the original discussion. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

• Pawel Dembicki (13 Mar 24)

  kernel/mpc85xx: Create kernel files for v6.6 (from v6.1) This is an automatically generated commit. During a `git bisect` session, `git bisect --skip` is recommended. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

• Pawel Dembicki (13 Mar 24)

  mpc85xx: refresh kernel config Done by 'make kernel_oldconfig'. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>